High-performance	Reliability
Ease of use	Value for money

Once the desired bass level has been set, press the Mode Button to set the requested level for the treble. The Main Information Display will show TREBLE 0dB. By turning the Volume Button to the right, the treble level will increase, turning the Volume Button left will decrease the treble level. Once the desired treble level has been set, press the Mode Button to set the requested level for the balance. The Main Information Display will show BALANCE 0. By turning the Volume Button to the right, the balance will move to the right speaker, turning the Volume Button left will move the balance to the left speaker. Press the Mode Button again to return the the normal volume indication. Press "Source Direct" until the the Main Information Display shows DIRECT ON to bypass the tone control to ensure purest sound performance. Press again to turn the bypass function off and to make the tone and balance controls function again. ENGLISH Making a recording You may record any source to tape or to CD-R or to both simultaneously. You may also connect a second tape deck to the CDR inputs and outputs to record from tape to tape (in either direction). To select the desired source for recording (this can be a different source than the one being listened to), press the Record Source Selector up or down button on the front panel repeatedly until the indicator for the name of the source to be recorded is shown in the Main Information Display. NOTE: The record output signal is taken directly from the program source and is unaffected by the Volume, Bass, Treble or Balance controls. Important Notes: · The functions "Source Direct" and "Record Source" can be selected on the front panel only, not from the remote control. · 3-head cassette decks with monitoring function can be connected to "Tape" or "CDR" connectors too, but their monitoring function cannot be used...